PS200 Configuration & Operation Guide
MULTI PUMP-PROCESS CONFIGURATION
Page 51
Program Lag Units
Once the first PumpSmart drive is programmed, the
remaining drives can be quickly programmed by uploading
the parameters that have just been entered into the
PumpSmart keypad, downloading the parameters into the
remaining drives and adjusting a few parameters.
UPLOAD DRIVE PARAMETERS
KEY SEQUENCE
FUNC
Press to enter the Function
Mode selection screen
OR
Use the arrows to scroll to
UPLOAD
Uploading the drive
parameters to the
keypad allows additional
identical drives to be
quickly programmed.
ENTER
Press to upload the drive
parameters to the keypad
With the drive parameters successfully loaded to the keypad,
remove it from the drive and connect it to the next drive in
place of the original keypad. Using the same basic process as
uploading the parameters, download the parameters to the
new drive, and replace the original keypad.
NOTE - The drive to be downloaded must be set in the
Multipump Macro (Parameter 11.02 APPLICATION MACRO)
prior to performing the download.
DOWNLOAD DRIVE PARAMETERS
KEY SEQUENCE
FUNC
Press to enter the Function
Mode selection screen
OR
Use the arrows to scroll to
DOWNLOAD
ENTER
Press to download the
drive parameters to the
keypad
ACT
PAR
FUNC
DRIVE
ENTER
1 L
Æ
0.0 rpm 0
=> => => => => => =>
UPLOAD
ACT
PAR
FUNC
DRIVE
ENTER
1 L
Æ
0.0 rpm 0
=> => => => => => =>
DOWNLOAD
Summary of Contents for PumpSmart PS200
