Technical Documentation
opti-check
v2.8.2-K11
124/332
ipf electronic GmbH
Lüdenscheid, Germany
11.6.2 Test Protocol
– Statistic
On the Statistics tab, you can even evaluate the job just tested using its individual feature checks according
to various criteria. The results are displayed graphically using a histogram.
The currently displayed result can be exported as a *.csv or *.txt file.
Under
Feature
, select the feature of the tested job or the entire job (number of OK/NOK) to be evaluated.
Under
Value
, you may evaluate the numerical results of the feature check (the angle of the object's rotation
in the event of a part location).
Minimum:
Set the minimum of the range of values here.
Number of classes:
You can set the scaling between the Minimum and Maximum here.
Maximum:
Set the maximum of the range of values here.
If you move the mouse pointer over the histogram, a tool tip appears containing the values of the current
mouse pointer position.
The average and the standard deviation of the evaluation are displayed in the lower region.
