Technical Documentation
opti-check
v2.8.2-K11
158/332
ipf electronic GmbH
Lüdenscheid, Germany
12.3.2 Contour comparison
This feature check compares the contour of a taught-in object with the contour of the current object. In the
comparison, adjacent pixels are counted and correspondence is determined on the basis of switching points.
To use this feature check to its best effect, it is highly advisable to combine it with part location.
This feature check supports external Teach. Here all of the contours will be adopted in the model, but the
switching points remain unchanged.
The field of view must firstly be defined.
The corresponding object is then taught in.
