ipf electronic opti-check Technical Documentation Manual Download Page 23

Page: 23 / 332

Technical Documentation

opti-check

v2.8.2-K11

23/332

ipf electronic GmbH

Lüdenscheid, Germany

1. Start the set-up program from the CD and follow the installation instructions.

2. A link to the

software

will be made on your desktop. The software is launched by double clicking on

this link.

3. Check the

network settings

to connect to the device.

When the device

has been correctly connected and the software is successfully installed, the Vision Sensor

can be commissioned using the software.

NOTE

You can launch the Application Suite using a command line parameter and automatically
connect to the device via an IP address.

Example:

appsuite2.exe /ip=192.168.0.250

(default IP address)

There is also the option to launch the

Application Suite

in different languages using a

command line parameter.

/l=de (German)
/l=en (English)
/l=fr (French)

Example:

appsuite2.exe /ip=192.168.0.250 /l=en

(Start the

Application Suite

in English with the default IP address)

Summary of Contents for opti-check













































































































































































































































































































































Search results

Summary of Contents for opti-check

Reviews:

Related manuals for opti-check

Brands by name

Popular brands

ipf electronic opti-check, Technical Documentation Manual

Search results

Summary of Contents for opti-check

Reviews:

Related manuals for opti-check

Brands by name

Popular brands