manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 94 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 94

12000 Series CLI

True Scale Fabric Switches 12000 Series CLI

Reference Guide

July 2015

94

Configurable presets

index : name     : state

------------------------------

  1   : Dump     : Enabled 

  2   : Fatal    : Enabled 

  3   : Error    : Enabled 

  4   : Alarm    : Enabled 

  5   : Warning  : Enabled 

  6   : Partial  : Disabled 

  7   : Config   : Disabled 

  8   : Info     : Disabled 

  9   : Periodic : Disabled 

  15  : Notice   : Enabled 

  10  : Debug1   : Disabled 

  11  : Debug2   : Disabled 

  12  : Debug3   : Disabled 

  13  : Debug4   : Disabled 

  14  : Debug5   : Disabled 

2.5.6.7

logSyslogTest

Test the Syslog configuration.

Syntax

logSyslogTest [severityType]

Options

-e 

–

 

Send Error severity CSM test message to Syslog.

-w 

–

 

Send Warning severity CSM test message to Syslog

-n 

–

 

Send Warning severity CSM test message to Syslog.

Sample Output

-> logSyslogTest -e

Currently configured Syslog host is: 0.0.0.0 port 514 facility 22

Syslog configuration has been tested

Notes

This command tests the Syslog configuration by sending CSM message(s) to registered 

Syslog servers.

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments