manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 78 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 78

12000 Series CLI

True Scale Fabric Switches 12000 Series CLI

Reference Guide

July 2015

78

2.5.5.50

bmPriority

Displays the priority of the embedded baseboard manager.

Syntax

bmPriority

Options

None.

Sample Output

-> bmPriority

The BM Priority is 0

The BM Elevated Priority is disabled

Notes

The priority of the Baseboard Manager (BM) determines which BM will become the 

master BM for the fabric. The priority values are 0 (lowest) and 15 (highest). The BM 

with the highest priority becomes the master BM for the fabric. The elevated priority 

value determines what the priority of the BM will be if it becomes Master. This allows 

persistent failovers that do not automatically fail back by configuring the elevated 

priority to be higher than all normal priorities. This feature is effectively disabled when 

set to the default of zero. The subnet manager must be running to display the priority.

2.5.5.51

pmPriority

Display the priority of the embedded performane manager.

Syntax

pmPriority

Options

None.

Sample Output

-> pmPriority

The PM Priority is 0

The PM Elevated Priority is disabled

Notes

The priority of the Performance Manager (PM) determines which PM will become the 

master PM for the fabric. The priority values are 0 (lowest) and 15 (highest). The PM 

with the highest priority becomes the master PM for the fabric. The elevated priority 

value determines what the priority of the PM will be if it becomes Master. This allows 

persistent failovers that do not automatically fail back by configuring the elevated 

priority to be higher than all normal priorities. This feature is effectively disabled when 

set to the default of zero. The subnet manager must be running to display the priority.

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments