manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 15 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 15

True Scale Fabric Switches 12000 Series CLI

July 2015

Reference Guide

Order Number: G91931004US

15

12000 Series CLI

Sample Output

-> broadcast "The system will be rebooted in 5 minutes."

Notes

Writes the supplied message to all other active CLI sessions. The message to be written 

must be encapsulated in quotes, and non-empty.

2.5.1.8

swapBsDel

Swaps the backspace and delete character key bindings.

Syntax

swapBsDel

Options

None.

Sample Output

-> swapBsDel

Notes

Terminals may bind the backspace and delete key bindings differently. This command 

swaps two commonly used bindings, which allow the user to use the backspace and 

delete keys properly without having to adjust their terminal settings. Backspace and 

delete swapping is persistently maintained per user (i.e. each login account can have a 

separate binding).

2.5.1.9

setTermWidth

Change the terminal width for text formatting purposes.

Syntax

setTermWidth width

Options

width – 

Width of the user’s terminal window. Minimum width is 20 characters.

Sample Output

-> setTermWidth 100

Notes

Allows modification of the terminal width used for text formatting purposes. Note that 

not all commands adhere to this setting.  The minimum width is 20 characters.

2.5.1.10

getTermWidth

Displays the terminal width for text formatting purposes.

Syntax

getTermWidth

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments