manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 29 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 29

True Scale Fabric Switches 12000 Series CLI

July 2015

Reference Guide

Order Number: G91931004US

29

12000 Series CLI

Syntax

IpoIbConfigEnable <- IpoIb enable>

Options

None.

Sample Output

-> IpoIbConfigEnable

2.5.1.42

IpoIbConfigDisable

Disables the IPoIB feature.

Syntax

IpoIbConfigDisable

Options

None.

Sample Output

-> IpoIbConfigDisable

2.5.1.43

IpoIbAddressShow

Displays the IpoIb IP address and associated netmask.

Syntax

IpoIbAddressShow

Options

None.

Sample Output

-> IpoIbAddressShow 

Notes

IPoIB must be enabled to display these fields.

2.5.1.44

IpoIbAddressSet

Change the IpoIb IP address and associated network mask.

Syntax

IpoIbAddressSet -h ipaddress -m netMask

Options

-h ipaddress 

–

 

the new IP address in dotted notation format 'xxx.xxx.xxx.xxx'.

-m netMask 

–

 

network mask. (in hexidecimal format).

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments