Intel True Scale Fabric 12000 Series Reference Manual Download Page 65

Page: 65 / 125

True Scale Fabric Switches 12000 Series CLI

July 2015

Reference Guide

Order Number: G91931004US

12000 Series CLI

Sample Output

-> smOptionConfig dyn-plt

[dyn-plt] Dynamic packet lifetime support is enabled

Virtual Fabric: Default

Multicast Group: 0

[def-mcgrp-create] Default multicast group auto-creation is enabled

Notes

The subnet manager must be running to display the non-default modes of operation.

2.5.5.23

smDefBcGroup

Displays the default multicast group configuration.

Syntax

smDefBcGroup

Options

None.

Sample Output

-> smDefBcGroup

Notes

The subnet manager must be running to display default multicast group information.

• Valid MTU values are 1(256), 2(512), 3(1024), 4(2048), and 5(4096)
• Valid RATE values are 2(2.5GB), 3(10GB), 4(30GB), 5(5GB), 6(20GB), 7(40GB),

8(60GB), 9(80GB), 10(120GB)

• Valid Values for SL are 0 to 0xF
• Valid Values for QKEY are 0 to 0xFFFFFFFF
• Valid Values for FlowLabel are 0 to 0xFFFFF
• Valid Values for TClass are 0 to 0xff

2.5.5.24

smGidPrefix

Set the Subnet Prefix (default=0xfe80000000000000).

Syntax

smGidPrefix [prefix]

Options

None.

Sample Output

-> smGidPrefix

Summary of Contents for True Scale Fabric 12000 Series






























































































































Search results

Summary of Contents for True Scale Fabric 12000 Series

Reviews:

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 65 / 125

Search results

Summary of Contents for True Scale Fabric 12000 Series

Reviews: