manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 14 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 14

12000 Series CLI

True Scale Fabric Switches 12000 Series CLI

Reference Guide

July 2015

14

Sample Output

-> killCliSession

must supply session number

Notes

This command logs out remote sessions. Use 'who' to obtain the list of active sessions.

2.5.1.6

who

Displays currently active CLI sessions.

Syntax

who

Options

None.

Sample Output

user       role   index   logged in             last cmd         type   ip address

----------------------------------------------------------------------------------

admin     admin    0    13:19:03 07/11/2008  09:41:20 07/11/2008 serial   0.0.0.0

Notes

Displays a list of currently active CLI sessions. Note that a session can be 'active', but 

no user information available (in most cases, this indicates the session is waiting for 

the user to enter login information).

For each session the following information is displayed:

• user: user name of the logged in user
• role: security role of the user
• index: internal session index
• logged in: timestamp of when the user logged in
• last cmd: timestamp of the users last command
• type: method used to connect to the system
• ip address: ip address of the user (if applicable)

2.5.1.7

broadcast

Write a message to all active CLI sessions

Syntax

broadcast msg

Options

msg

 – 

Message (Note: the message text must be encapsulated in quotes "".

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments