manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 66 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 66

12000 Series CLI

True Scale Fabric Switches 12000 Series CLI

Reference Guide

July 2015

66

Subnet Prefix: 0xfe80000000000001

Notes

Use this command to set the subnet prefix of the SM. The SM must be offline and the 

subnet prefix value is 8 byte hex. The subnet manager must be running to display 

default multicast group information.

2.5.5.25

smSubnetSize

Set/display the subnet size for the subnet manager.

Syntax

smSetSubnetSize

Options

None.

Sample Output

-> smSubnetSize

Notes

Use this command to tune the SM to handle the configured fabric size. The subnet 

manager must be running to display subnet size information.

2.5.5.26

smTopoErrorThresh

Set/display the error threshold for a topology sweep.

Syntax

smTopoErrorThresh

Options

None.

Sample Output

-> smTopoErrorThresh 100

Set topology error threshold to:100

Notes

Sets the maximum number of errors the SM may encounter during a sweep before 

abandoning the sweep. The subnet manager must be running to display the error 

threshold for a topology sweep.

2.5.5.27

smTopoAbandonThresh

Set/display the maximum consecutive times the SM can abandon a sweep due to too 

many errors (default = 3).

Syntax

smTopoAbandonThresh

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments