manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 42 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 42

12000 Series CLI

True Scale Fabric Switches 12000 Series CLI

Reference Guide

July 2015

42

Notes

This command allows prefix learning from attached routers, and does not affect link-

local or manually configured addresses.

2.5.3.11

autoConfIPv6Disable

Disables IPv6 address autoconfiguration.

Syntax

autoConfIPv6Disable

Options

None.

Sample Output

-> autoConfIPv6Disable

Notes

Prevents prefix learning from attached routers, and does not affect link-local or 

manually configured addresses.

2.5.3.12

autoConfIPv6Show

Displays IPv6 address autoconfiguration setting(s).

Syntax

autoConfIPv6Show

Options

None.

Sample Output

-> autoConfIPv6Show

2.5.3.13

ndpShow

Displays the IPv6 Neighbors table.

Syntax

ndpShow

Options

None.

Sample Output

-> ndpShow

2.5.3.14

showDefaultRoute

Displays the default gateway IP address.

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments