manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 68 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 68

12000 Series CLI

True Scale Fabric Switches 12000 Series CLI

Reference Guide

July 2015

68

Recieve wait time: 250 milliseconds

Notes

The subnet manager must be running to display this information.

2.5.5.30

smNonRespDropTime

Displays the seconds to wait before dropping a non-responsive node (default = 600 

seconds).

Syntax

smNonRespDropTime

Options

None.

Sample Output

-> smNonRespDropTime 300

Set Nonresponsive node drop time to: 300 seconds

-> smNonRespDropTime

Non-responsive node drop time: 300 seconds

Notes

The subnet manager must be running to display this information.

2.5.5.31

smNonRespDropSweeps

Displays the sweeps to wait before dropping a non-responsive node (default = 3 

sweeps).

Syntax

smNonRespDropSweeps

Options

None.

Sample Output

-> smNonRespDropSweeps 3

Set Nonresponsive node drop sweeps to: 3 sweeps

-> smNonRespDropSweeps

Non-responsive node drop sweeps: 3 sweeps

Notes

The subnet manager must be running to display this information.

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments