manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 73 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 73

True Scale Fabric Switches 12000 Series CLI

July 2015

Reference Guide

Order Number: G91931004US

73

12000 Series CLI

Index: 1 PLT Value: 15 (~134217 usec)

Index: 2 PLT Value: 17 (~536870 usec)

Index: 3 PLT Value: 17 (~536870 usec)

Index: 4 PLT Value: 18 (~1073741 usec)

Index: 5 PLT Value: 18 (~1073741 usec)

Index: 6 PLT Value: 18 (~1073741 usec)

Index: 7 PLT Value: 18 (~1073741 usec)

Index: 8 PLT Value: 19 (~2147483 usec)

Index: 9 PLT Value: 19 (~2147483 usec)

Dynamic packet lifetime values for pathrecord queries are enabled

(use the smOptionConfig command to change)

Notes

Setting values to numbers greater than 19 give an effectively-infinite packet lifetime. 

The subnet manager must be running to display dynamic packet lifetime values.

2.5.5.40

sm1xLinkMode

Displays how the subnet manager handles 1x links.

Syntax

sm1xLinkMode

Options

None.

Sample Output

-> sm1xLinkMode

Mode is 'off'. Erroneous 1x links will be activated normally.

-> sm1xLinkMode ignore

-> sm1xLinkMode

Mode is 'ignore'. Erroneous 1x links will not be activated.

Notes

When set to 'off', all links come up normally. When set to 'ignore', links that only come 

up at 1x (when they were enabled for a higher rate) are forced down. These downed 

ports can be queried to aid debugging errors in the fabric. The subnet manager must 

be running to display this information.

2.5.5.41

smTrapThreshold

Display the port auto-disable urgent trap threshold value (in minutes).

Syntax

smTrapThreshold

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments