manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 80 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 80

12000 Series CLI

True Scale Fabric Switches 12000 Series CLI

Reference Guide

July 2015

80

-contentOnly 

–

 

Displays the contents of the XML configuration file.

-noprompt 

–

 

Do not prompt to 'Continue' for each page of displayed output.

Sample Output

-> smShowConfig

<!-- Common FM configuration, applies to all FM instances/subnets -->

<Common>

  <!-- Various sets of Applications which may be used in Virtual Fabrics -->

  <!-- Applications defined here are available for use in all FM instances. -->

  <!-- Additional Applications may be defined here or per FM instance. -->

  <!-- Applications specified per FM instance will add to -->

  <!-- instead of replace these Application definitions. -->

  <Applications>

    <!-- Each Application can have one or more ServiceIDs and/or MGIDs. -->

    <!-- These will be matched against PathRecord and Multicast SA queries -->

    <!-- so that the returned SLID/DLID, PKey, SL, etc are appropriate for -->

    <!-- the Virtual Fabric(VF) which contains the application(s). -->

    <!-- Every Application must have a unique <Name> -->

    <!-- The name must be unique among all Application names within an -->

    <!-- FM instance. -->

    <!-- When defined at Common level must be unique within all instances. -->

    <!-- The name is limited to 64 characters and is case sensitive. -->

    <!-- ServiceIDs are 64 bit values which identify applications within the -->

    <!-- PathRecord query and are typically used within the InfiniBand -->

    <!-- Communication Manager (CM) protocol to identify the application for -->

Continue? [Y] 

...

Notes

With no arguments, the XML configuration file timestamp and contents will be 

displayed, one screen at a time. Enter Y or Enter at the prompt to continue displaying 

command output. Enter N at the prompt to terminate the output. The -infoOnly and -

contentOnly flags will limit the information displayed. Use the -noprompt flag to send 

all output to the screen at once.This command is only available on the Master Chassis 

management card.

2.5.5.55

smLooptestStart

Starts the SM Loop Test in normal mode.

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments