manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 12 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 12

12000 Series CLI

True Scale Fabric Switches 12000 Series CLI

Reference Guide

July 2015

12

Log            Log file display and configuration

IbSwitchInfo   InfiniBand port configuration and statistics

TimeManagement Display and configure the system time

Snmp           Snmp configuration commands.

Type the name of the group you want to list or return to exit:

Notes

Use '

list all

' to display brief help for all available commands.

Use '

list all -verbose

' to display verbose help for all commands.

Use '

list -noprompt

' to display the list of command groups.

2.5.1.3

history

Displays the command history for this session.

Syntax

history

Options

None.

Sample Output

-> history

command history [30 max lines]:

  list

  Deprecated

  Network

  Firmware

  Log

  IbSwitchInfo

  TimeManagement

  Snmp

  Ethernet

  help

  list

  history

2.5.1.4

reboot (12200 Managed, 12300, 12800 Series)

Reboots the device.

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments