manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 36 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 36

12000 Series CLI

True Scale Fabric Switches 12000 Series CLI

Reference Guide

July 2015

36

Options

beacon 

–

 

1=on, 0=off.

Sample Output

-> setBeacon 0

Notes

Calling this function with no argument displays its current value.

2.5.2.10

setSystemContact

Allows the user to set/show the chassis system contact.

Syntax

setSystemContact [contact]

Options

contact 

–

 

System contact string.

Sample Output

-> setSystemContact [contact string]

Notes

If the system contact is not specified, the current system contact is displayed.

2.5.2.11

setSystemName

Allows the user to set/show the chassis system name.

Syntax

setSystemName [name]

Options

name 

–

 

System name string

Sample Output

-> setSystemName [name string]

Notes

If the system name is not specified, the current system name is displayed.

2.5.2.12

setSystemLocation

Allows the user to set/show the chassis system location.

Syntax

setSystemLocation [location]

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments