manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 79 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 79

True Scale Fabric Switches 12000 Series CLI

July 2015

Reference Guide

Order Number: G91931004US

79

12000 Series CLI

2.5.5.52

smRestorePriority

Restore normal priorities from elevated states for the SM, BM, and PM.

Syntax

smRestorePriority [sm | bm | pm | all]

Options

sm 

–

 

Restore normal SM priority

bm 

–

 

Restore normal BM priority

pm 

–

 

Restore normal PM priority

all 

–

 

Restore normal priorities for the SM, BM and PM.

Sample Output

-> smRestorePriority

Notes

This command restores the normal priorities of various subnet managers after they 

have elevated their priority following a failover. Issuing this command allows the 

'unsticking' of a sticky failover. Issuing this command without arguments will restore 

the normal priorities of the SM, BM, and PM.

2.5.5.53

smResetConfig

Resets the XML configuration for the embedded subnet manager (ESM) to factory 

defaults. This command is only available on the Master chassis management card.

Syntax

smResetConfig [-noprompt]

Options

-noprompt 

–

 

proceed with a configuration reset without a confirmation prompt.

Sample Output

-> smResetConfig

Proceed with configuration reset? [N] y

Default XML configuration file has been generated.

2.5.5.54

smShowConfig

Displays the XML configuration file.

Syntax

smShowConfig [-infoOnly | -contentOnly] [-noprompt]

Options

-infoOnly 

–

 

Displays the timestamp for the XML configuration file.

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments