manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 28 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 28

12000 Series CLI

True Scale Fabric Switches 12000 Series CLI

Reference Guide

July 2015

28

2.5.1.39

genPost

Displays General POST results and runs tests

Syntax

genPost

Options

None.

Sample Output

MasterMM202-> genpost

ID Gen POST Name                   Result   ENA DEM PWR Result-Ext

---------------------------------------------------------------------------

*  POST TEST CPU                   NO-RUN    Y   N   Y

*  POST TEST MEM DRAM              NO-RUN    Y   N   Y

*  POST TEST BOOTROM IMG CHKSUM    NO-RUN    Y   N   Y

*  POST TEST RUN-TIME IMG CHKSUM   NO-RUN    Y   N   Y

*  POST TEST JMP RAM               NO-RUN    Y   N   Y

6  POST TEST I2C PROBE             NO-RUN    Y   Y   N

7  POST TEST FAN TRAYS             NO-RUN    Y   Y   N

8  POST TEST PWR SUPPLIES          NO-RUN    Y   Y   N

9  POST TEST REAL-TIME CLOCK       NO-RUN    Y   Y   N

10 POST TEST PROTO                 NO-RUN    Y   Y   N

Notes

Displays General POST results and runs tests.

2.5.1.40

IpoIbConfigShow

Displays the IPoIB Enable/Disable setting.

Syntax

IpoIbConfigShow

Options

None.

Sample Output

-> IpoIbConfigShow 

2.5.1.41

IpoIbConfigEnable

Enable IPoIB feature.

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments