manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 37 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 37

True Scale Fabric Switches 12000 Series CLI

July 2015

Reference Guide

Order Number: G91931004US

37

12000 Series CLI

Options

location 

–

 

System location string

Sample Output

-> setSystemLocation [location string]

Notes

If the system location is not specified, the current system location is displayed.

2.5.3

Network

2.5.3.1

ifShow

Displays information for all the network interfaces for the switch, including the 

management port and the internal Ethernet network.

Syntax

ifShow [ifName]

Options

ifName 

–

 

The network interface name.

Sample Output

-> ifShow

sbe0 (unit number 0):

        Flags: (0x8063) UP BROADCAST MULTICAST ARP RUNNING

        Type: ETHERNET_CSMACD

        Internet address: 192.168.100.9

        Broadcast address: 192.168.111.255

        Internet address: 172.26.3.19

        Broadcast address: 172.26.15.255

        Netmask 0xfffff000 Subnetmask 0xfffff000

        Net 0xc0a86000 Subnet 0xc0a86000

        Ethernet address is 00:06:6a:01:99:c8

        Metric is 0

        Maximum Transfer Unit size is 1500

        2524301 octets received

        6604130 octets sent

        28728 packets received

        14310 packets sent

        19665 broadcast packets received

        31 broadcast packets sent

        0 multicast packets received

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments