manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 63 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 63

True Scale Fabric Switches 12000 Series CLI

July 2015

Reference Guide

Order Number: G91931004US

63

12000 Series CLI

Syntax

smShowSMParms

Options

None.

Sample Output

-> smShowSMParms

SM priority is set to 4

SM LMC is set to 0

SM sweep rate is set to 300

SM max retries on receive set to 3

SM max receive wait interval set to 250 millisecs

switchLifetime set to 15

HoqLife set to 9

VL Stall set to 5

packetLifetime constant is set to 18

Dynamic PLT ON using values: 1 hop=16, 2 hops=17, 3 hops=17, 4 hops=18, 5 hops=18, 

6 hops=18, 7 hops=18, 8+hops=19

SM DBSync interval set to 900

SM topology errors threshold set to 0, max retry to 3

Notes

Use this command to display a sampling of subnet manager parameters.

2.5.5.19

smPKeys

Configure a partition key (PKey) in the PKey table.

Syntax

smPKeys

Options

None.

Sample Output

-> smPKeys

Notes

PKeys are used for partitioning the subnet. Only configure PKeys if the host driver 

supports this. Invalid configuration of the PKey may render the fabric inoperable. The 

subnet manager must be running to display PKeys.

2.5.5.20

smInfoKey

Set the subnet manager key (SMInfo) value.

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments