manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 90 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 90

12000 Series CLI

True Scale Fabric Switches 12000 Series CLI

Reference Guide

July 2015

90

W|2006/10/04 20:26:31.276U: Thread "Log" (0x8fdab3b0)

        Log: Unable to Send Trap: 523:Bad:65535

W|2006/10/04 20:26:31.326U: Thread "Log" (0x8fdab3b0)

        Log: Unable to Send Trap: 523:Bad:65535

W|2006/10/04 20:28:29.912U: Thread "tTelnetd" (0x8fe143e0)

        Osa: telnetd: connection requested by 192.168.0.107

W|2006/10/04 20:46:26.113U: Thread "tTelnetd" (0x8fe143e0)

        Osa: telnetd: connection requested by 192.168.0.107

W|2006/10/05 19:37:08.727U: Thread "tTelnetd" (0x8fe143e0)

        Osa: telnetd: connection requested by 192.168.0.46

W|2006/10/05 20:19:20.101U: Thread "tTelnetd" (0x8fe143e0)

Notes

This command displays the log file that is contained in RAM.

2.5.6.2

logClear

Clears the log file.

Syntax

logClear [-noprompt]

Options

-noprompt 

–

 

delete all log messages without prompting the user

Sample Output

-> logClear

Ram Log cleared

Notes

This command deletes all entries in the log file.

2.5.6.3

logConfigure

Configures the log settings.

Syntax

logConfigure

Options

None.

Sample Output

-> logConfigure

Type Q or X to exit.

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments