manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 103 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 103

True Scale Fabric Switches 12000 Series CLI

July 2015

Reference Guide

Order Number: G91931004US

103

12000 Series CLI

Syntax

ismChassisSetSpeed [speed] [-bounce]

Options

speed 

–

 

1=SDR 2=DDR 3=SDR/DDR 4=QDR 5=SDR/QDR 6=DDR/QDR 7=SDR/DDR/

QDR

-bounce 

–

 

Brings the active links down and back up if a new value is set.

Sample Output

-> ismChassisSetSpeed 1

L01P01  link speed is SDR

L01P02  link speed is SDR

L01P03  link speed is SDR

...

Notes

This command can be used to set the supported link speed on each of the chassis 

ports. This command does not cause the associated ports to change the active or 

enabled speed of the port. The active and enabled speed is changed the next time the 

port transitions down and back up. Each external port must be connected to another 

similarly configured port to establish a link.

Calling this function without a speed designator displays the current values of the port.

Calling this function with the 

-bounce

 option disruptively brings active links down and 

back up so the links use the new setting immediately. Otherwise the new setting is 

used the next time links retrain.

2.5.8.9

ismPortEnable

Allows the user to enable or disable a port.

Syntax

ismPortEnable port

Options

port 

–

 

Port name.

Sample Output

-> ismPortEnable S3BL08b

Notes

The option 

portName

 is case sensitive.

2.5.8.10

ismChassisSetEnable

Allows the user to view and enable ports for entire chassis.

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments