manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 10 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 10

12000 Series CLI

True Scale Fabric Switches 12000 Series CLI

Reference Guide

July 2015

10

2. The system prompts for a user name. The CLI has the following default user 

names:

Operator access: 

operator

Administrator access: 

admin

Type the appropriate user name and press 

Enter

.

3. The system prompts for a password. The CLI has the following default passwords:

Operator access: 

operpass

Administrator access: 

adminpass

Type the appropriate password and press 

Enter

. The system responds with:

Welcome to the <SWITCH> CLI. Type 'list' for the list of commands.

2.5

Groups and Commands

This section lists all CLI functional groups along with the commands for each group. 

The commands for all 12000 switches are listed. Any commands specific to a switch(es) 

is noted. For more specific information for each functional group, the user would 

execute the 

help <GROUP NAME>

 command. For more specific command information, 

the user would execute the 

help <COMMAND NAME>

 command.

2.5.1

General

2.5.1.1

help

Displays help information for a specific command.

Syntax

help [command]

Options

command – 

The command to display help for.

Sample Output

-> help list

NAME

       list

SYNOPSIS

       list [group] [-noprompt]

DESCRIPTION

       List available commands.

OPTIONS 

       group     - List the commands in that particular group

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments