manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 51 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 51

True Scale Fabric Switches 12000 Series CLI

July 2015

Reference Guide

Order Number: G91931004US

51

12000 Series CLI

2.5.4.7

showCapability

Display capability and feature information for a specific release.

Syntax

showCapability [-key feature]

Options

-key feature 

–

 

Displays information for a particular feature.

Sample Output

-> showCapability

fwPush: 1

2.5.4.8

showLastScpRetCode

Displays the return code from the last SCP Firmware Push.

Syntax

showLastScpRetCode slot | -all

Options

slot 

–

 

The slot number in the chassis.

-all 

–

 

All slots in the chassis.

Sample Output

-> showLastScpRetCode 101

SCP: Slot 101 Last Exit Code: 0: Success

Notes

This allows for automated systems to determine if a SCP firmware push was successful 

or not.

2.5.4.9

fwVersion

Displays the firmware versions for a unit.

Syntax

fwVersion [slot]

Options

slot 

–

 

Slot number.

Sample Output

Management Module 201 Information -----------------

  Firmware Version: 5.0.0.0.73

  Firmware build:   5_0_0_0_73

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments