manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 114 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 114

12000 Series CLI

True Scale Fabric Switches 12000 Series CLI

Reference Guide

July 2015

114

Syntax

ismIslBounce

Options

None.

Sample Output

-> ismIslBounce

2.5.8.29

ismPortBounce

Bounce enabled port(s).

Syntax

ismPortBounce

Options

None.

Sample Output

-> ismPortBounce

2.5.9

TimeManagement

2.5.9.1

time

Configure the time on the device.

Syntax

time -S ipaddr | -T hhmmss[mmddyyyy]

Options

-S ipaddr 

–

 

Sets the NTP Server IP address.

-T hhmmss[mmddyyyy] 

–

 

Set the local clock time hour, minutes, and seconds along 

with the month, day, and year.

Sample Output

-> time -S 172.26.0.254

Configured the NTP server ip address successfully

13:53:02  10/06/2006

Configured to use NTP server IP address: 172.26.0.254

Notes

Time can be configured locally (using a local clock) or set to be updated by an SNTP 

server. Please note that if you set the time locally, the unit will unconfigure the NTP 

server IP address if set. If no options are passed in, the current system time will be 

printed out.

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments