manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 69 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 69

True Scale Fabric Switches 12000 Series CLI

July 2015

Reference Guide

Order Number: G91931004US

69

12000 Series CLI

2.5.5.32

smLogLevel

Displays or dynamically sets the Subnet Manager logging level.

Syntax

smLogLevel [<loglevel>]

Options

loglevel 

–

 

logging level 1-7

Levels: 1=WARN+, 2=INFI, 3=INFO+, 4=, 5=, 

6=, 7=TRACE+.

Sample Output

-> smLogLevel 4

Notes

The subnet manager (SM) must be running to use this command. Changes made with 

this command will only affect the currently running SM, and will be forgotten if the FM 

is restarted or the chassis is rebooted. To make persistent changes edit the FM XML 

configuration file.

2.5.5.33

smLogMode

Displays or dynamically sets the Subnet Manager logging mode.

Syntax

smLogMode [<logmode>]

Options

logmode 

–

 

logging mode 0 or 1

Levels: 1=WARN+, 2=INFI, 3=INFO+, 4=, 5=, 

6=, 7=TRACE+

Sample Output

-> smLogMode 1

Notes

The Subnet manager must be running to use this command. Changes made with this 

command will only affect the currently running SM, and will be forgotten if the FM is 

restarted or the chassis is rebooted. To make persistent changes edit the FM XML 

configuration file.

2.5.5.34

smLogMask

Displays or dynamically sets the Subnet Manager logging mask for a specific 

subsystem.

Syntax

smLogMask <subsystem> [<mask>]

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments