manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 33 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 33

True Scale Fabric Switches 12000 Series CLI

July 2015

Reference Guide

Order Number: G91931004US

33

12000 Series CLI

Sample Output

-> showIBNodeDesc

IB Node (SMA) Description is = Intel 12300 GUID=0x00066a00030001xa

Notes

Entering this command with no parameters displays the current Node Description. The 

-d

 option will display the unit's default value.

2.5.2.4

setIBNodeDesc

Set the IB Node (SMA) Description.

Syntax

setIBNodeDesc <nodeString>

Options

<nodeString> 

–

 

New node string.

Sample Output

-> setIBNodeDesc "Intel 12300 GUID=0x00066a00da0xx"

IB Node (SMA) Description successfully changed to = Intel 12300

Notes

New node name must be enclosed in quotes. Node name must be no more than 64 

characters.

2.5.2.5

setIBNodeDescFormat

Changes the IB Node (SMA) description format modifier.

Syntax

setIBNodeDescFormat [format]

Options

format 

–

 

Use 0 or 1 to set the format

Sample Output

-> setIBNodeDescFormat

Format = 0

Notes

If the format is not specified, then the current format selection value is displayed. 

When the format is 0, the SMA node description is in a verbose format. When the 

format is one the format is brief. The brief format is more consistent with the CLI/GUI 

Port Stat port naming.

2.5.2.6

fruInfo

Displays the EEProm contents.

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments