manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 13 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 13

True Scale Fabric Switches 12000 Series CLI

July 2015

Reference Guide

Order Number: G91931004US

13

12000 Series CLI

Syntax

reboot [now][-m][slot n][-s][-n][all]

Options

now

 – Does not prompt the user before rebooting.

-m

 – (12200 and 12300) Reboot Intel

®

 True Scale Edge Switch (non-disruptive).

(12800) Reboot Master (local) Management Module (non-disruptive).

slot n

 – Reset specific device where n = slotNumber (disruptive). For a 12200 and 

12300, 0 is the only valid slot number. For 12800 switches, only 

management module slot numbers are valid.

-s

 – (12200 and 12300) N/A

(12800) Reboot Slave (remote) Management Module

-n

 – (12800) Reboot Slave (remote) management card only (non-disruptive)

(12200 and 12300) N/A

all

 – Reboot All local devices (excludes -n/-m/-s).

Sample Output

-> reboot

Disruptive reboot selected

Proceed with reboot? [N] 

Notes

You may reboot the local (Master) Management Module or the remote (Slave) 

Management Module with one or multiple arguments.

Non-disruptive arguments will not interfere with switch traffic.

Providing the argument all performs disruptive reboot of all present Management 

Modules and cards.

If rebooting the local device from telnet, ssh, etc., you will have to reconnect after 

rebooting.

Default (no arguments) reboots local device disruptively after prompt.

See also: '

resetCard

', '

showInventory

'.

2.5.1.5

killCliSession

Terminates an existing CLI session

Syntax

killCliSession sessionNumber

Options

sessionNumber

 – 

The 

sessionNumber

 that is returned from the who command.

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments