manualshive.com logo in svg

Intel True Scale Fabric 12000 Series, Reference Manual, Page: 5 / 125

Share
Download
Intel True Scale Fabric 12000 Series Reference Manual Download Page 5

True Scale Fabric Switches 12000 Series CLI

July 2015

Reference Guide

Order Number: G91931004US

5

12000 Series CLI

1.0

Introduction

This manual describes the command line interface (CLI) task information for the Intel

®

 

True Scale Fabric Switches 12200, 12300, and 12800.

This manual is organized as follows:

This section describes the intended audience and technical support.

Section 2.0

 describes the 12000 switch CLI commands.

1.1

Intended Audience

This manual is intended to provide network administrators and other qualified 

personnel a reference for the command line interface of the Intel

®

 12000 series 

switches.

1.2

Related Materials

• Intel

®

 True Scale Fabric Switches 12000 Series Hardware Installation Guide

• Intel

®

 True Scale Fabric Switches 12000 Series User Guide

• Intel

®

 True Scale Fabric Switches 12000 Series Release Notes

• Intel

®

 True Scale Fabric Switch 12200 Release Notes

1.3

Documentation Conventions

This guide uses the following documentation conventions:

•

Note:

 provides additional information.

•

Caution:

 indicates the presence of a hazard that has the potential of causing 

damage to data or equipment.

•

Warning:

 indicates the presence of a hazard that has the potential of causing 

personal injury.

• Text in 

blue

 font indicates a hyperlink (jump) to a figure, table, or section in this 

guide, and links to Web sites are also shown in 

blue

. For example:

—

Table 2

 lists problems related to the user interface and remote agent.

— See 

“Installation Checklist” on page 6

.

— For more information, visit 

www.intel.com

.

• Text in 

bold

 font indicates user interface elements such as a menu items, buttons, 

check boxes, or column headings. For example:

— Click the 

Start

 button, point to 

Programs

, point to 

Accessories

, and then 

click 

Command Prompt

. 

— Under 

Notification Options

, select the 

Warning Alarms

 check box.

• Text in 

Courier

 font indicates a file name, directory path, or command line text. 

For example:

— To return to the root directory from anywhere in the file structure:

Type

 cd /root 

and press ENTER. 

— Enter the following command: 

sh ./install.bin

• Key names and key strokes are indicated with UPPERCASE:

— Press CTRL+P.

Summary of Contents for True Scale Fabric 12000 Series






























































































































Reviews:

No comments