Intel® Server System M50FCP1UR System Integration and Service Guide
71
6.6
Riser Card Replacement
This section provides instructions for the replacement of a riser card.
Required Tools and Supplies
•
Replacement riser card accessory kit
•
Anti-static wrist strap and conductive workbench pad (recommended)
•
Phillips* head screwdriver #1
The system includes three different riser card brackets. The replacement instructions are the same for each.
Figure 90. Chassis Riser Card Bracket Screws
1.
Power off the system and disconnect the system power cords.
2.
Remove the system top cover (see
Section 6.1.1
).
3.
(If present) Unscrew the four fastener screws on the chassis back panel. See
4.
(If present) Disconnect all cables (internal and external) that may be attached to the riser assembly.
Figure 91. Riser Card Bracket Removal
5.
On the front and back of the riser card bracket, loosen the two screw heads securing the bracket to
the server board. See Letter A.
6.
Grasp the riser card bracket with both hands and carefully pull it up and away from the chassis.
See Letter B
7.
If an add-in card is present, remove it from the riser bracket assembly.
Summary of Contents for M50FCP1UR
