Intel® Server System M50FCP1UR System Integration and Service Guide
20
Figure 4. System Top Cover Panel Shipping Screws
The system ships from the factory with the front cover panel and back cover panel screwed to the chassis. A
total of four screws, one on each side of the front cover panel, and one on each side of the back cover panel,
need to be removed to detach both top cover panels from the chassis.
Note:
A non-skid surface or a stop behind the server system may be needed to prevent the server system
from sliding on the work surface.
Figure 5. System Cover Removal
For each top cover panel:
1.
While pushing down on both the left and right buttons of the given top panel (see Letter A), slide the
top cover panel towards the front (front panel) or back (back panel) of the chassis (see Letter B).
2.
Carefully lift the top cover panel up and away from the chassis.
Note:
Each top cover panel can slide along the chassis base for 10 mm and then needs to be lifted.
Summary of Contents for M50FCP1UR
