Intel® Server System M50FCP1UR System Integration and Service Guide
56
6.1
System Top Cover Removal / Installation
The system top cover consists of two panels, one over the front half of the system and one over the back
half of the system. To maintain system thermals, both top cover panels must be in place when the system is
operational.
Required Tools and Supplies
•
Anti-static wrist strap and conductive workbench pad (recommended)
•
Phillips* head screwdriver #1
6.1.1
System Cover Removal
Removal of both top cover panels is necessary when servicing any system component in the server chassis.
Before removing the top cover, power down the system and unplug all peripheral devices and the system
power cords.
Figure 65. System Top Cover Panel Shipping Screws
The top cover panels may be secured to the chassis using four screws, two on each side of the chassis. See
. If present, these need to be removed to detach both top cover panels from the chassis.
Note:
A non-skid surface or a stop behind the server system may be needed to prevent the server system
from sliding on the work surface.
Figure 66. System Cover Removal
Summary of Contents for M50FCP1UR
