Intel M50FCP1UR, Manual

Page: 21 / 133

Intel® Server System M50FCP1UR System Integration and Service Guide
21
2.2.2 System Cover Installation
Figure 6. System Cover Installation
For each top cover panel:
1. Carefully align and set the top cover panel on top of the chassis. Then, slide it inwards until it locks
into place (see Letter A).
Shipping Note: When transporting the server system, Intel recommends installing the four top cover screws
before shipping.
2.3 Processor Assembly and Installation
Components Required:
• 4 th Gen Intel® Xeon® Scalable processors
•
Processor tray–Packaging tray that came with the processor
• Processor carrier clip – one for each processor
•
Processor heat sink–1U standard heat sink or 1U
Enhanced Volume Air Cooling
(EVAC) heat sink
Required Tools and Supplies
• Anti-static wrist strap and conductive workbench pad (recommended)
•
T-30 Torx* screwdriver
• ESD Gloves
•
Phillips* head screwdriver #2
The Intel® Server System M50FCP1UR includes dual Socket-E LGA4677 processor sockets compatible with
the 4 th Gen Intel® Xeon® Scalable processor family.
The server system supports two types of heat sinks as shown in the following figure: The standard 1U heat
sink and Enhanced Volume Air Cooling (EVAC) heat sink. The type of heat sink used depends on the system
configuration. The 2.5” x 4 front drive system must use the EVAC heat sink on both processors. The 2.5” x 12
front drive system must use the standard 1U heat sink on both processors. For more information, refer to the
Intel® Server M50FCP Family Configuration Guide
.