Intel M50FCP1UR Manual Download Page 48

Page: 48 / 133

Intel® Server System M50FCP1UR System Integration and Service Guide

System Software Updates and Configuration

The Intel® Server System M50FCP1UR includes a system software stack that consists of:

•

System BIOS

•

Baseboard Management Controller (BMC) firmware

•

Intel® Management Engine (Intel® ME) firmware

Together, they configure and manage features and functions of the server system. A full software stack is

installed during the system manufacturing process but may not be the latest available version. Intel highly

recommends updating the system software stack to the latest available version for optimal performance and

system reliability. A System Update Package (SUP) containing the latest available system software stack can

be downloaded from the following Intel website:

http://downloadcenter.intel.com.

See the following Intel documents for more in-depth information about the system software stack and their

functions:

•

BIOS Firmware External Product Specification (EPS)–Intel NDA required

•

Integrated Baseboard Management Controller Firmware External Product Specification (EPS)–Intel

NDA Required

For guidelines and overview on BIOS Boot Menu, Setup, and hot keys, see the

Intel® Server Board

M50FCP2SBSTD Technical Product Specification

Summary of Contents for M50FCP1UR






































































































































Search results

Summary of Contents for M50FCP1UR

Reviews:

Related manuals for M50FCP1UR

Brands by name

Popular brands

Intel M50FCP1UR, Manual

Search results

Summary of Contents for M50FCP1UR

Reviews:

Related manuals for M50FCP1UR

Brands by name

Popular brands