INTEC GmbH
22/12/2016
Lift controller MLC 8000
Operating manual V2.0
52/196
1. Menu level
2. Menu level
3. Menu level
4. Menu level
Description
Targ.dist.
Specifies at what distance before target floor level (in mm), the
acoustic signal (gong) is switched on.
If this parameter is set to 0, the gong sounds if the lift starts door
opening.
Type
Arrival: The gong sounds only when entering a floor
Door open: The gong sounds while opening the door; even if the liftis
already located in that floor while the call was placed.
LC no dr.
Indicates whether the gong should also sound when the lift handles a
landing call in a floor for which doors were not set (lift only goes to the
floor, but do not open any doors)
LC change
pecifies whether the gong should sound again if the lift handled an up
or down landing call, but no car call is placed in the selected direction
and accordingly the other landing call (to opposite direction) is being
handled.
Time [s]
Pulse duration of the Gong signal.
If the value is set to '0', then the gong signal remains active as long as
the lift stands in a floor.
Speech unit
Parameters for controlling a speech unit
Speech [ms]
Pulse duration of signals for controlling a voice unit
Delay [ms]
Time delay between setting of floor signals for voice output and
setting the "Enable" signal.
Targ.dist.
Distance before entering the target floors, in which the speech unit will
indicate the floor.
Anti nuisance
Parameters for avoiding call misuse
CC undo
no: a car call can not be cleared by the lift user
single: By pressing an acknowledged car call again this car call is
cleared.
double: By quick double pressing an acknowledged car call this car
call is cleared.
Prior.: By quick double pressing of a car call button an advanced car
call is set or an already acknowledged car call is changed to an
advanced car call.
LC dir. dep.
No: Even if the lift has 2 landing calls in each floor (for upwards and
downwards direction) the lift controller will clear both calls if the lift
arrives this floor
Yes: The lift controller always handles just the landing call in the
actual direction
Max. CC no.
This parameter may limit the maximum number of car calls that the lift
