Minifors 2 - Benchtop Bioreactor
Operation
07 February 2019
Page
145
of
214
The PID settings can be adjusted here as required or, if necessary,
can be reset to factory settings using
RESET PID
.
For details on the PID controller, see the chapter “PID Controller -
Basics” and associated subchapters.
If necessary, the value ranges used for the cascaded parameter(s)
can be adjusted here.
In the example below, the cascaded parameter
Stirrer
is selected
for this purpose in the visual representation, and the input fields for
Minimum
and
Maximum
become
visible
.
After pressing an input field, the key pad appears for typing in the
value (also see the “SETPOINT - Setting the setpoint” section.
After setting the desired cascade, entries are confirmed using
OK
.
