Minifors 2 - Benchtop Bioreactor
Operation
07 February 2019
Page
171
of
214
After the initialisation phase, the menu display changes:
Header: Date of the last calibration
1 POINT CALIBRATION
: Select 1-point calibration
2 POINT CALIBRATION
: Select 2-point calibration
SHOW SENSOR STATUS
: Shows data and values
produced by the firmware of the sensor manufacturer
integrated in the sensor.
3.
Select 2-point calibration.
INFORMATION
2-point calibration can also be carried out in 1-point calibration
mode one point after the other.