Minifors 2 - Benchtop Bioreactor
Operation
07 February 2019
Page
137
of
214
10.3.2 SETPOINT - Setting the Setpoint
The setpoints can be entered in any operating state of the equip-
ment for parameters that are not controlled via cascade and have a
controller output. Parameter control is however only active when a
batch has been started using
START
BATCH
and the correspond-
ing parameter has been activated using
ON/OFF
.
After pressing the input field in the
SETPOINT
column of the de-
sired parameter, the key pad appears for typing in the setpoint and,
if necessary, for activating the parameter (using ON/OFF)
OK
confirms the input, the key pad disappears.
CANCEL
makes the key pad disappear without making any
changes.
If an inadmissible setpoint is entered, an error message is gener-
ated that prompts a correct entry within the permissible parameter
setpoints.
