imagistics DL260, Operating Manual

Page: 66 / 180

3-21
4. Selecting the Finishing
Chapt
e
r 3
M
a
king
Copi
es
Loading the Originals
Note the correct direction of the originals if the copies are to be stapled in Staple Mode.
Useful Tip
Refer to the instruction labels on the machine or the Document Feeder.
Note the correct direction of the originals if the copies are to be punched using Hole Punch.
When copies are made using the stapling function, the stapled copy sets may not be neatly stacked on the
tray or may even fall off the tray unless certain conditions are met regarding the number of copies to be
stapled and the number of copy sets to be made. Use the following table as a guide when making copies.
Staple
Duplexing Document Feeder Automatic Document Feeder Original Glass
Staple Position
1166O040AA
1166O041AB
Staple Position
1166O037AB
Staple Position
Hole Punch
Panel Duplexing Document Feeder Automatic Document Feeder Original Glass
1170P097EA
Punched Hole Position
1166O107EA
Punched Hole Position
1166O108EB
Punched Hole Position
1166O109EB
1170P098EA
Punched Hole Position
1166O110EB
Punched Hole Position
166O111EB
Punched Hole Position
1166O112EC
Note on Stapling
Copy Set Capacity
No. of Copies Stapled When Finisher is Mounted When Mailbin Finisher is Mounted
2 copies 200 sets 200 sets
3 to 5 copies 150 sets 150 sets
6 to 10 copies 100 sets 100 sets
11 to 20 copies 70 sets 50 sets
21 to 30 copies 53 sets 33 sets
31 to 40 copies 45 sets 25 sets
41 to 50 copies 40 sets 20 sets