imagistics DL260, Operating Manual

Page: 15 / 180

1-2
Cha
p
te
r 1
S
a
fe
ty
N
o
te
s
1. Installing the Copier
Installation Site
To ensure utmost safety and prevent possible malfunctions of the copier, install it in a location which
meets the following requirements.
◆
A place away from a curtain or the like that may catch fire and burn easily.
◆
An area where there is no possibility of being splashed with water or other types of liquid.
◆
An area free from direct sunlight.
◆
A place out of the direct air stream of an air conditioner, heater, or ventilator.
◆
A well-ventilated place.
◆
A dry place.
◆
A dust-free location.
◆
An area not subject to undue vibration.
◆
A stable and level location.
◆
A place where ammonia or other organic gas is not generated.
◆
A place which does not put the operator in the direct stream of exhaust from the copier.
◆
A place which is not near any kind of heating device.
Power Source
The power source voltage requirements are as follows :
◆
Use a power source with little voltage fluctuation.
Voltage Fluctuation : Within ± 10%
Frequency Fluctuation : Within ± 0.3%
Space Requirements
To ensure easy copier operation, supply replacements, and service maintenance, adhere to the
recommended space requirements detailed below. Allow a clearance of 150mm or more at the back of the
copier as there is a ventilation duct.
1166O253CC
Unit: Inch
<With 9608, 9612, 9632, 9635 and 9628 mounted>
64”
49-1/4” 9-1/2” 5-1/2”
23-1/4” 25-3/4”
32-1/2”
58-
1/
2”
44-
1/
4
”
40
”
22”
26-3/4”
40-1/2”
1-1/4” 12-1/2”