imagistics DL260, Operating Manual, Page: 159 / 180

5-30
Chapt
e
r 5
W
h
en a M
e
ss
ag
e App
e
ar
s
8. What Does Each Message Mean?
What does each message mean?
Message Cause Action
A malfunction was detected.
The SMART controller has
called your Technical
Representative. The copier malfunctioned and
is unable to make copies. Call and inform your Technical
Representative of the code
being shown on the Touch
Panel.
Please add toner. Toner has run out and the
copier is unable to make copies. Replace the Toner Bottle with a
new one.
(When the Message “Add
Toner.” Appears
☞
p. 5-10)
The Imaging Unit needs to be
changed. Call your technical
representative. The PC Drum has reached its
service life and the copier is
unable to make copies. Call your Technical
Representative.
Stapler empty. Replace Staple
Cartridge or cancel Staple
mode. The staples have run out. Reload the Staple Cartridge
with a new clip.
(When the Message “Stapler
Empty.” Appears
☞
p. 5-14)
The time has come when the
copier needs service. Call your Technical
Representative.
Return the following number of
originals to Document Feeder. After a misfed sheet of paper
has been cleared, you need to
reload the originals fed out onto
the Document Exit Tray onto
the Document Feed Tray. Add the number of originals
indicated to the bottom of the
remaining stack and reload.
Cannot
××××
: not enough free
memory.
The copier is unable to scan the
data for lack of memory space. Wait until a print cycle is run or
erase a reserved job to make
room for new data.
Image data has caused memory
overflow. Your copy job has
been canceled. The copier is unable to scan the
data for lack of memory space. Wait until a print cycle is run or
erase a reserved job to make
room for new data.
This mode cannot be selected
with the
××××
.
You have set two functions that
conflict with each other. Cancel either one of the two
functions.
1168P189CC