imagistics DL260, Operating Manual

Page: 44 / 180

2-27
6. Auxiliary Functions
Chapt
e
r 2
G
e
tt
in
g
to
K
n
o
w
Y
o
u
r C
o
pi
e
r
If an access number has been programmed, it
allows only particular persons to use the copier or
a supervisor to keep track of the number of copies
made by a particular department.
NOTES
• If an access number has been programmed, a
copy cycle can be initiated only after the
access number has been input to the copier.
• Before you can use this function, you must
first turn “ON” the “Copy Track” function
available from Utility.
☞
p. 4-22
• When Copy Track is set to “100 Accounts,”
you must enter the 4-digit access code
assigned to your account in order to make
copies.
• When Copy Track is set to “1000 Accounts,”
you must enter your 3-digit account number in
order to make copies.
<Entering the Access Number>
From the 10-key Pad, enter the access
number and press the Access Mode key.
NOTE
To correct the access number entered, first
press the Clear key, then enter the new number.
When the initial screen reappears, you can
now start the copy cycle.
When the copy cycle is completed, press the
Access Mode key again.
Access Number
1168P168CB
1168P203CB
1
1134P438DA
1166O030AA
2
3