ICP DAS WISE User Manual
http://wise.icpdas.com
80
After all settings of the AO channels are completed, continue the
configuration of other channels, and after all channel settings are
completed, click “OK” button to save the changes and return to
Modbus RTU Module List.
Please note: To set up the Power On value of the AO channels on
M-7000/tM/DL/LC/IR/iSN modules, please use DCON Utility to set
the value.
6.5.5 The Coil Output Setting of Modbus RTU Module
The Modbus RTU Module Coil Output Setting page is shown as
follow:
Figure 6-35
：
Modbus RTU module Coil Output Setting page
The settings are as follow:
Nickname: For user to define nickname for the module, this
nickname will be displayed on the “Channel Status” and “Rule
Setting” pages.
Description: The Description field provides a space for the user to
make a brief description of this module.
Address: The address will be the Modbus address of this Modbus
RTU module, please make sure the address is the same as the
settings of the module, if the setting is not accurate, the connection
for WISE to the Modbus RTU module will be failed.
