ICP DAS USA WISE-75 M Series User Manual Download Page 249

Page: 249 / 314

ICP DAS WISE User Manual

http://wise.icpdas.com

249

13 Channel Status

Channel Status page offers an easy way to view monitoring page that allows you to

view important controller information in real time without SCADA software.

This

page will be updated once every 5 seconds, showing the latest data of the controllers.

The Channel Status page includes the following information.



Default Channel Status page: It displays the all I/O channel information

based on the sorting of all I/O Modules.



User-defined Channel Status page: It displays the I/O channel status based on

the user-defined arrangement. Please refer “

8.8 I/O Channel Status setting

”

section for detail.



Internal Register Status Page: It displays the WISE‟s Internal Register status.

Figure 13-1

：

Channel Status page

Summary of Contents for WISE-75 M Series



























































































































































































































































































































Search results

Summary of Contents for WISE-75 M Series

Reviews:

Related manuals for WISE-75 M Series

Brands by name

Popular brands

ICP DAS USA WISE-75 M Series, User Manual

Search results

Summary of Contents for WISE-75 M Series

Reviews:

Related manuals for WISE-75 M Series

Brands by name

Popular brands