ICP DAS USA WISE-75 M Series, User Manual

Page: 53 / 314

ICP DAS WISE User Manual
http://wise.icpdas.com
53

Modbus RTU Slave (Connect to HMI or SCADA )
Figure 5-25
：
COM Port Interface Setting for Modbus RTU Slave
The settings steps are as below:
i
In the “Baudrate” field, select the Baudrate from the dropdown list,
the Baudrate of WISE and HMI or SCADA have to be set the
same.
ii
In the “Parity” and “Stop bits” fields, set up the Parity and Stop
bits. The Parity and Stop bits of WISE and HMI or SCADA have
to be set the same.
iii
After all settings are completed, click “Save” button to save the
changes.

DCON Master (Connect to DCON modules)
Figure 5-26
：
COM Port Interface Setting for DCON Master
The settings steps are as below:
i
In the “Baudrate” field, select the Baudrate from the dropdown list,
the Baudrate of WISE and DCON module have to be set the same.
ii
In the “Parity” and “Stop bits” fields, set up the Parity and Stop
bits. The Parity and Stop bits of WISE and DCON module have to
be set the same.