ICP DAS USA WISE-75 M Series User Manual Download Page 312

Page: 312 / 314

ICP DAS WISE User Manual

http://wise.icpdas.com

312

iii.

Check your mailbox and find the “Account Activation” email sent by “IoTstar

Trial”, and then click the link of the account application “IoTstar Trial” provided

in the email to complete the activation process of the trial account.

iv.

When the trial account is successfully activated, the page will display the

“Successfully activated” message as below.

When the trial account is successfully activated, the “IoTstar Trial” will send a

“Trial Account Activated” email to the email address you entered,

click https://iotstartrial.icpdas.com to visit the login page of the “IoTstar Trial”.

Summary of Contents for WISE-75 M Series



























































































































































































































































































































Search results

Summary of Contents for WISE-75 M Series

Reviews:

Related manuals for WISE-75 M Series

Brands by name

Popular brands

ICP DAS USA WISE-75 M Series, User Manual

Search results

Summary of Contents for WISE-75 M Series

Reviews:

Related manuals for WISE-75 M Series

Brands by name

Popular brands