ICP DAS USA WISE-75 M Series, User Manual

Page: 225 / 314

ICP DAS WISE User Manual
http://wise.icpdas.com
225
Follow the steps below:
i
From the dropdown list of the “Module & Channel” field,
select the AO channel to execute actions.
ii
Specify the Operator to be “=”, “+=”, or “-=” from the
dropdown list in the “Operator” field. The 3 operators are as
follow
：
 “=”
：
Indicate assign the new AO channel value as the
value in “Value” field
 “+=”
：
Indicate assign the new AO channel value as the
original AO channel value plus the value in “Value”
field.
 “-=”
：
Indicate assign the new AO channel value as the
original AO channel value minus the value in “Value”
field.
iii
Set up the value in the “Value” field, WISE provides the
following 12 value options to be used in the “Value” field:

User-Defined: Input a User-Defined value under the
“Value” field.

Internal Register: Select the source and the number of
the Internal Register from the dropdown list. About the
“Source” field, the “Local” mean the Internal Register is
from the Host controller (WISE). The “Remote” mean
the Internal Register is from the others remote WISE
controller.

DI Counter: Using DI channel counter values from ICP
DAS I/O Module, select the module and channel from
the dropdown list to specify which channel value will be