ICP DAS USA WISE-75 M Series User Manual Download Page 144

Page: 144 / 314

ICP DAS WISE User Manual

http://wise.icpdas.com

144

8.5 IoTstar Connection Setting

The section is for user to complete

the connection setting between WISE

and IoTstar or

“

ICP DAS IoTstar Trial Service

”. Please follow the steps

below for the setting:

Click “Enable” of the “Function Status” field to enable the connection

to IoTstar.

Two options : “User-built IoTstar” and “IoTstar Trial” are available for

selection.

users

select

“User-built

IoTstar”,

please

click

in the “Server Address”

field, then input the IP address or Domain Name of the PC or Platform

(with IoTstar installed). Enter the login username and password in the
“Username” and “Password” fields. WISE will login and connect to the

IoTstar by the information provided.

Figure 8-28

：

IoTstar Connection Setting Page(1)

If users want the WISE to connect the “IoTstar Trial”, please click

in the “Server Address” field, then enter

the login username and password (require to apply in advance) in the
“Username” and “Password” fields. WISE will login and connect to the
“IoTstar Trial” by the information provided.

Please Note: For the account application of the “IoTstar Trial”, please

Summary of Contents for WISE-75 M Series



























































































































































































































































































































Search results

Summary of Contents for WISE-75 M Series

Reviews:

Related manuals for WISE-75 M Series

Brands by name

Popular brands

ICP DAS USA WISE-75 M Series, User Manual

Search results

Summary of Contents for WISE-75 M Series

Reviews:

Related manuals for WISE-75 M Series

Brands by name

Popular brands