ICP DAS WISE User Manual
http://wise.icpdas.com
186
Figure 9-43
：
I/O Data Table Setting page (2)
iv
When you complete the setting of Interface, Module and Channel,
please click the “Insert” button to add the channel of the I/O module
into the I/O Data Table.
v
If you want to change the position of the I/O channel in the I/O Data
Table, please left-click the I/O channel by mouse, and drag it up or
down to arrange the new position of the I/O channel. When the I/O
channel arrive the right position, release the mouse left-button to let the
I/O channel be at the new location.
vi
If you want to remove one I/O channel of the I/O Data Table, please
click the I/O channel by mouse, then click the “Remove” button which
is located at the right-lower corner of the I/O Data Table to remove the
I/O channel.
vii
If you want to remove all I/O channel of the I/O Data Table, please
directly click the “Remove All Setting” button which is located at the
left-lower corner of the I/O Data Table to remove all I/O channels.
viii
After you finish the I/O Data Table settings, click “Save” button to save
the settings.
9.8.2 Active Sending of I/O Data Table
The settings steps are as below:
i
Click on the “Sending Setting” tab at the right-upper corner of the
Active I/O Sending setting page.
